[ADSP-SC584 via ICE-1000 ] problem of loading .ldr file to W25Q128JV flash

Hi,

I'm trying to load an .ldr file in W25Q128JV with the procesor SHARC ADSP-SC584 using the existing driving for W25Q128FV by modifying some settings like DEVICE ID and buffer size but I'm always facing a connection problem with the following errors:

Error: [TpsdkServer] Failed to connect to processor.

Error: 0x80044005
Error Description:

Do you have any ideas please about this behavior? What the modifications that should be performed on driver W25Q128FV to support the flash W25Q128JV Knowing that I'm using the command line tool cldp.exe for the loading.
What is the difference other than the frequency between W25Q128JV and W25Q128FV?

The command line of loading are :
cldp.exe -proc ADSP-SC584 -core 1 -emu ICE-1000 -driver sc584_w25q128fv_dpia_Core1.dxe -cmd prog -erase affected -format hex -file Button_LED_GPIO_SC589_SHARC_Core0.ldr

I'm blocking. Any helps?

Best regards
Krm

Audio Signal Processors

adsp-sc584

SHARC Audio Processors/SoCs