ADAU1462 reset and idle power consumption
Subscribe
Can you please advise if the datasheet power consumption figures are correct for reset and idle over TA = −40°C to +105°C.
It states the maximum is 559mA !!
http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1462-1466.pdf
Page 5
TA = 25°C
Idle State 18.3 18.7 19.9 mA Power applied, DSP not enabled
Reset State 18.3 18.7 19.9 mA Power applied, RESET held low
Page 6
TA = −40°C to +105°C
Min Typ Max
Idle State 5.9 15.7 559 mA Power applied, DSP not enabled
Reset State 5.9 15.7 559 mA Power applied, RESET held low
changed the datasheet link
[edited by: euanbrown at 1:58 AM (GMT -4) on 7 Sep 2018]
Please log in to reply.