EVAL-ADAU1467Z Documentation mismatch. Documentation available Rev.A, Product received Rev.B

Hello ENJSimon,

I think the documentation is almost through our technical publications department. I will let the Apps Engineer for that board know about your post.

He should have a PDF of the preliminary document that can be attached for you.

Thanks,

Dave T

Unfortunately, without the updated documentation, the product can not be used.

Even if they have some preliminary documentation it could be fine.

Without documentation, however, it can not be used for my purpose.

Hello,

As you we have received a Rev B board, Any preliminary documentatin will be apreciated. Thanks.

Hello DaveThib

We would realy appreciate some esquema or documentation about ADAU1467z Rev B. There are new headers, some old ones has changed their names on the Board, and beacause this, we can´t be shure of what we are doing or were we are conecting our wires. (specifically I need to know where to access the slave i2c port of the dsp).

Thanks

P.D.i´m sorry about my English

Many apologies for your troubles. The revised User Guide is still being edited. In the meantime, I've uploaded the schematics and the artwork for this board. The silkscreen should be self explanatory for many of the headers. I've also attached a "starter" project for this board that configures all of the necessary registers for the CODEC.

Best regards,

Ken

EVAL-ADAU1467Z Rev. B Schematics

EVAL-ADAU1467Z Rev. B PCB Artwork

EVAL-ADAU1467Z Rev. B - Starter Project with CODECs Configured

Thanks you Ken,

This information is very usefull for us.

Best regards,

Mikel

Ken,

Has there been any progress on the user guide for the Rev B of the EVAL-ADAU1467Z?

Kind Regards

George

George,

Attached is a draft of the User Guide for Rev B. There are plans to expand the section on programming the CODEC, but the schematics and figures are all updated.

PDF

Ken

Thanks very much Ken, that's most helpful indeed

=]

Cheers,

George