Finding a good adsp ez-kit close to sytem 21xx
Hi there;
I am looking for a adsp- ez-kit with analog 2 channel- In and 2 channel-Out for a frequency range: at least 10kHz.
Since I worked with development board ez-kit lie 2181 and know some of the basic understanding about 16 bit 15-format programing, so I wonder, you could help me to find a 16 bit-ez-kit/ that
1) its eazy to handle
2) it is close to system 2181
3) it must be a new adsp 21xx evaluation board that could work very easy with windows 7,8,10.
4) at least 2 channel_Analog In and 2 channel_Analog_Out + microphone_input
5) It would be fine, if it has a LCD dsiplay
Please tell me what kind of your evaluation board will match my request and beside the board what other accessories will be need to have a complet set for pragraming, debugging and emulation between the program and the board via a PC (windows 7, 8, 10).
My best regard
OEW;
Edit Notes
Hi there;
I am looking for a adsp- ez-kit with analog 2 channel- In and 2 channel-Out for a frequency range: at least 10kHz.
Since I worked with development board ez-kit lie 2181 and know some of the basic understanding about 16 bit 15-format programing, so I wonder, you could help me to find a 16 bit-ez-kit/ that
1) its eazy to handle
2) it is close to system 2181
3) it must be a new adsp 21xx evaluation board that could work very easy with windows 7,8,10.
4) at least 2 channel_Analog In and 2 channel_Analog_Out + microphone_input
5) It would be fine, if it has a LCD dsiplay
Please tell me what kind of your evaluation board will match my request and beside the board what other accessories will be need to have a complet set for pragraming, debugging and emulation between the program and the board via a PC (windows 7, 8, 10).
My best regard
OEW;
[edited by: Onlineelektronik Work at 8:31 AM (GMT 0) on 9 Dec 2019]
ezkit
ez-kit_lite_board
visualdsp++
evaluation
Moving to Processors and DSP community
I don't understand your response. What is your answer about my request?
Hi Onlineelektronik,
Unfortunately, there is no new product to replace ADSP-21xx products, that are compatible with the assembly instructions. BTW, you can also have a look at the latest processors as detailed below.
Analog Devices' SHARC® processor family dominates the floating-point DSP market with exceptional core and memory performance and outstanding I/O throughput. With multiple products variants and price points, SHARC brings real-time floating-point processing performance to many applications where dynamic range is key. Latest products provide leading performance/power efficiency and advanced connectivity with an integrated ARM® core.
The latest ADSP-SC5xx processors are Multicore SHARC+ARM® SOC Delivers 24GFLOPS Performance at Under 2W for Advanced Real-Time Audio and Industrial Applications. You would find more information about these processors in the below link.
www.analog.com/.../adsp-sc58x-adsp-2158x-series.html
Our latest ADSP-SC58x or ADSP-SC57x multi-core processor evaluation kits (multi-core) has on-board ADC and DACs. When you navigate through our product specific page you would find its evaluation platform with associate.
www.analog.com/.../adsp-sc58x-adsp-2158x-series.html
In case if you are looking for single core floating point processor, we recommend to use any of the ADSP-214xx processors. We would suggest you to refer the selection tables of SHARC processors, which can be found in the following link.
www.analog.com/.../sharc.html
In case if you are looking for fixed point processors, we recommend you to have a look at the Blackfin 16-/32-bit fixed point embedded processors offer software flexibility and salability for convergent applications: multi-format audio, video, voice and image processing, multi-mode base-band and packet processing, control processing, and real-time security.
The ADSP-BF60x and ADSP-BF70x are the new processors in Blackfin family. The ADSP-BF60x processors are the Dual-Core processor up to 1GHz with Hardware Support for HD Video Analytics. The ADSP-BF70x processors are the latest Low Power 400MHz Blackfin+ embedded processor with 1MByte L2 SRAM & DDR2/LPDDR Interface.
You can get more information about Blackfin processors in the below link:
www.analog.com/.../blackfin.html
We would suggest you to use the parametric search link below to select the appropriate processor.
www.analog.com/.../11131
We have Processors Software and Tools page provides a convenient look-up table to indicate to users what evaluation platforms, extender cards, emulators, software development tools, and middle ware are available for the specific processors you have chosen to evaluate for your designs.
SHARC - www.analog.com/.../sharc-processors-software-and-tools.html
BLACKFIN - www.analog.com/.../blackfin-processors-software-and-tools.html
For more details on pricing and availability questions, please contact your nearest ADI sales and distributors. Please find the link given below.
www.analog.com/.../find-sale-office-distributor.html
We have evaluation kits available for different processors which will provide a platform for customer to evaluate our DSPs. When you navigate through our product specific page you would find its evaluation platform with associate.
If you can provide more information on other requirements from the external interfaces, the speed grade, memory requirements, package, which you are looking for, then we can help you narrow down to select the right derivative in processor family.
Also, please let me know what are the peripherals that is used in the application? Have you implemented your code in C or ASM ?
Regards,
Anand Selvaraj.
Please log in to reply.