ADSP-TS201S Tigersharc Processor

Hi,

I am using 2 ADSP-TS201S processors in my custom board.Both are connected to each other through link port 0/1/2.

data transmission between two processors via link port happens.But sometimes. Data sent from one processor reaches wrong to another processor.

Most of the time, wrong transmissions happens only on the first time. After giving reset(or power cycle ), correct data is sent.
Example:

data[4]= {0x00000000,0x11111111,0x22222222,0x33333333}

this data is send from one processor.

but what is reached on the another processor, is :-

data[4]={0x00000011,0x11111122,0x22222233,0x33333344}.

after giving reset or power cycle, It sends the correct data.

condition is , link ports must be working in 4 bit manner.

linkport

dsp

TigerSHARC Embedded Processors

tigersharc

processors and dsp

dsp&processors

adsp-ts201s

Show More