How to download the ldr file,when using S25FS127 spi flash
My project is base on BF607,software boot from SPI Flash. Ldr file was download well with cldp.exe when flash was 25Q32BV. But the IC is non-activated now. I want to replace the flash with Spansion S25FS127. But the driver " bf609_w25q32bv_dpia.dxe" load failed! So I want to know how i can do? Thanks!
This basically requires a driver change. You need to modify the driver and recompile it to work for your new flash device.
Regards,
Nabeel
I use a SST26VF032 SPI Flash and modified the driver,
i'm able to download the LDR but BF607 don't boot the code.
what are the correct loader settings? and how can I check the LDR (I use ldrviewer but don't know if the
file is able to do the correct boot.
My loader settings are
-proc ADSP-BF607 -si-revision 0.1 -b SPI -f hex -width 8 -bcode 0x1 -p 0
and I use CLDP with following settings
-proc ADSP-BF607 -emu ICE-2000 -driver "SPI_FlashPrg.dxe" -cmd prog -erase affected -offset 0 -format hex -file "ItecTst_DualCore.ldr"
I skipped the dual boot settings to check only if one core is able to boot. No init file usage ?
I try the default initfile with no effect.
regards chris
Are you still working on this, if so how can we help you here?
This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.
Thank you,
EZ Admin
Please log in to reply.