bf561程序加载问题
大家好，请教一个问题：
我在bf561程序开发中，当挂上仿真器调试程序时，程序可以正常工作。但是当我把程序作为ldr文件下载到flash后，程序却不能加载起来，处理器一上电就不停的复位。请大家帮忙解决一下。谢谢了
Hi,
Could you please repost your question in English - we are unfortunately unable to offer support in other languages. You may prefer to use our Chinese EngineerZone.
Regards,
Craig.
Hi,
You will find some instructions on how to boot from flash available in the VisualDSP++ installation. You can find it here: C:\Program Files\Analog Devices\VisualDSP 5.0\Blackfin\Examples\. Its called 'Booting from Flash readme.txt', which i have also attached to this email.
In addition the following FAQ may be of use as its discusses how to debug a program loaded to flash:
FAQ: How to debug a target board which boots from Flash?
Regards,
Colin.
Hi,Craig
When I developed programs on bf561,I encountered a problem.The phenomenon is as follows:
When I built the program as executable files,and then debug the program with emulator,the program executed accurately;But when I built the program as loader file,and download the loader file in the flash memory,and then restart the board,the board reset constantly.In this case ,when I deleted some codes in my program,and rebulit the program as loader file again,and downloaded the program in the flash memory,the board was no longer reseting,and executed accurately.But I don't want to delete the codes,can you tell me what can I do.
Thanks
Please log in to reply.