What is the rise time of bclk output in ADAU1442?

Hi Gerry,

I am afraid that the answer here is not very simple, because the load on the pin can have a great impact on the rise time - the answer is generally in the single-digit nanoseconds, but that does not really describe the ringing and overshoot that can occur. We provide an IBIS model for the ADAU144x; if you have access to simulation software, you can optimize your signal integrity. Otherwise, we specify 2 levels of current drive capability, 2 mA (low strength) and 6 mA (high strength), for each drive port. If you do not have any simulation tools, I would recommend that you keep things simple by adding a series resistor at the source end, start with 22.1 ohms and see what the waveform looks like at the load.

Best regards,

Coleman

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

Thank you,
EZ Admin