ADAU 1701 Datasheet Lack of clear booting documentation
Subject: Lack of clear documentation
Inquiry Description:
One of our custers has purchased the EVAL_ADAU_1701_MINIZ board in order to start a new professional sound project for megaphony inside big buildings.
A Cortex M3 MCU is involved in order to inject the DSP Coefs "on the Fly" for doing a sound equalizer where different tones quality is sensed remotely sensed.
We have a lack of information or application notes about basic procedures:
1.- In the ADAU 1701 Datasheet is shown how to do an I2C selfboot from an external memory... but our customer wants to be able to reprogram the Whole Firmware ( Or partially ) from the external MCU ?.... Do you have any example / app note for that ?
2.- The main purpose of ussing an external MCU is to be able to change the Volume,Equalizer,Filter Coeficients, etc "on the fly" during execution.
Do you have any app note about how to get access to the right adresess ( How & what addresses ?? ) in order to do that ( Spi Slave, I2c Slave ?? ).
Best regards, Skyrider
Hello,
The following FAQ gives a good overview of how to use a microcontroller to boot a system, and also how to modify parameter values "on-the-fly" during realtime operation of the system.
https://ez.analog.com/docs/DOC-1806
One of our forum users, KJBob, also did nice tutorial here: https://ez.analog.com/thread/38874
Hopefully this will get you started. Let us know if you have additional questions!
KJBob also wrote a nice guide here: https://ez.analog.com/docs/DOC-10771
Thanks BrettG
Let’s see if it is enough for boosting my customer.
BR, Skyrider
Thanks a lot BrettG
Let’s see if it helps us. We need to study it.
Best regards, Ignacio
This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.
Thank you,
EZ Admin
Please log in to reply.