EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (8 topics).
8 topics · 33 messages
Filtered by: ADAV4601 ✕
-
Queries related to ADAV4601
I am working on a custom ADAV4601 board and USBi. I am powering up the IC using I2C script window. I am able to successfully power-up the IC and load a custom flow. 1. Is there a Delay command that I
-
Need help debugging proto board based on ADAV4601
Hello, I am having difficulty getting any sound from my ADAV4601 based proto board. Here is how it is put together: The crystal is 12.288MHz, not the default 24.576MHz There is WM8805 as SPDIF receive
-
Avoiding SRC with ADAV4601
Hello, Provided that there are no downsides to using the ADAV4601 at 192KHz: I would like to use the WM8805 in HW mode with its digital audio interface port configured as master. In the HW mode the WM
-
Sampling frequency of ADAV4601
Hello, I am near completing my board using WM8805 (in HW mode) and AD1895 interfaced to BCLK1, LRCCLK1, SDO0 and SDI0 of the ADAV4601. The system documents mentions the following: 1. The ADAV4601 inte
-
Using WM8805 with ADAV4601
Hello, WM8805 is an SPDIF transceiver from Wolfson. I want to use it in hardware (HW) mode with ADAV4601. In HW mode, the datasheet of WM8805 mandates use of an external crystal/ clock of 12MHz only.
-
ADAV4601 Registers
I designed a board with the ADAV4601 on it feeding analog audio into and out of the chip. I am using a USBi eval board to communicate with the ADAV4601 via SigmaStudio. When I drop the ADAV46xx block
-
How to program EEPROM with ADAV4601 + USB Serial Converter
Hi, I'm working with the ADAV4601 on our own PCB which is set up just like the eval board. I'm using the USB Serial Converter from the eval kit wiring I2C directly from the USB-EV bridge board to our
-
About ADAV4601
Hello, Is the ADAV available to general users or is it restricted to volume users? Since the ADAV400 is no longer available, this, unfortunately, becomes the only choice with in-built ADC and DAC. It