EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (7 topics).
7 topics · 30 messages
Filtered by: ADAU1372 ✕
-
8in/8out system around the ADAU1466
Dear All, I am interested in a quite complex system that will have to deal with many inputs and outputs. I checked the ADAU1466 evaluation board and it seems that, by using the two remaining serial in
-
ADAU1701 eval board controlling ADAU1372 codec eval board
Hi there, Just a quick one on using the eval_adau1701miniz to control the eval_adau1372 DACs. I noticed the eval_adau1701 board only has sdata_in bclk_in and possibly no way to output MCLK. Am I looki
-
ADAU1372 unused analogue pins
Page 28 of the ADAU1372 data sheet under the heading Analog Inputs states "Connect unused input pins to the CM pin or ac-couple them to ground." Under the heading Analog Line Inputs its states when si
-
AD1372 - does DAC sample rate follow ADC rate?
I had a '1372 configured as 96K throughout and found the dB/Hz response plot as expected (effective low pass @ around 22K) but when I configure as 96K sampling and 48K I2S bus the response plot seems
-
Wrong include generated for ADAU1372 on Sigmastudio 3.14.1 beta
I wanted to point out that the C code generated by SigmaStudio 3.14.1 beta contains errors. Specifically, the code to load the ADAU1372 is wrong because it declare 0 as the size of PLL_CTRL5 register.
-
SigmaStudio gave 'reserved' value for Register bit field...
Version 3.11 Build 2. Rev 1396. Added ADAU1372.dll to C:\Program Files\Analog Devices\SigmaStudio 3.11\. Started new project, dragged ADAU1372 device into workspace, made many changes under various ta
-
New system with ADAU1446 and ADAU1372
Hi All, I am looking for some guidance and confirmation on a proposed new system. I currently have a design that is quite sophisticated in its implementation and requires the utmost in signal fidelity