EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (8 topics).
8 topics · 34 messages
Filtered by: #3_2e00_3_2e00_0 ✕
-
Packing 8 16bit channels into one serial port
Hello! I'm designing V2 of my digital mixer, which uses an ADAU1466, ADCs, DACs, and an ESP32-S3 for the web interface. So far so good. V1 is working great, but for V2 I'd like to add multitrack recor
-
SigmaStudio+ Sample rate propagation
I found out that the T-Connector would not propagate sample rate downstream. Remove the T-Connector and connect straight to the next block and the block's sample rate follows upstream. Does anyone hav
-
Less Inst(cycles) in SS+ than in SS
My question is related to these two threads: - ez.analog.com/.../how-to-set-sample-rate-in-ss-like-done-in-4-7 - ez.analog.com/.../setting-sample-rate Preambule: I migrated a project from SSv4.7 to SS
-
Enable second I2C port on ADAU146x chips?
What are all of the settings necessary to enable the second I2C port on the ADAU146x series of SigmaDSP chips? I have designed and fabricated a board based on the ADAU1463. The only device on the SPI_
-
How to view I2C Read data
I am hoping to use SigmaStudio+ to debug the I2C link between an ADAU1463 and DAC chip. I added the I2C Read External Trigger, connected an On/Off button to the trigger input, and connected the output
-
Programming ADAU1452 via I2C in SigmaStudio+
I have used SigmaStudio 4.7 for programming ADAU1452 via I2C, using a "custom" USBi. However, I can't seem to do that in the new SigmaStudio+. Using a custom platform block, there isn't a way to conne
-
Indirect Parameter Access Table (IPAT) names in Sigma Studio +
I am working on converting an old sigma studio project to sigma studio + During that i found that is was lacking the option to chose a component to control via IPAT based on the name i have given the
-
Export system Files .h SIGMA_WRITE_DELAY erroroneus call
I dont know if this is a bug Sigmastudio+ 3.3.0 wen i export system files , the .h generated, calls this function on SigmastudioFW.h, with four arguments SIGMA_WRITE_DELAY(DEVICE_ADDR_ADAU145XSCHEMATI