EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (9 topics).
9 topics · 34 messages
Filtered by: #2-4-0 ✕
-
How to set Sequence File for Control Port IO?
I have a Custom Platform (for ADAU1463) with multiple Control Port IO modules (for A2B chips, ADC and DAC), but I cannot find out how to specify the Sequence File in the Settings. I can click on Setti
-
How to configure the ADAU1452 signal processing on the EVAL-AD2437A1NZ
Using SigmaStudio+, I connected two EVAL-AD2437A1NZ boards via USBi, configuring one as Main and the other as Sub. The connection is established correctly. The EVAL-AD2437A1NZ Manual states that Sigma
-
Sigma Studio + Poor / Erratic Graphical Parametric EQ UI Performance
This is my first post so hopefully I'm posting in the correct space with enough information but I've noticed some odd behavior while using the graphical parametric eq block thats not present on the ol
-
Sigmastudio+ EVAL-ADAU1467Z write EEPROM/selfboot
Hello, what do I need to do to write the EEPROM of EVAL-ADAU1467Z with Sigmastudio+ 2.4 and USBi and get it running in selfboot mode? When I create a new project and connect the PC with USBi and the U
-
Sigmastudio+ GPIO inputs always 48 kHz?
Hello, I am having a problem with Sigmastudio+ and the GPIO inputs. My DSP runs at 192 kHz, but the GPIO inputs are always at 48 kHz and cannot be adjusted! This causes problems when connecting them v
-
Importing from Sigma Studio 4.7 to Sigma + issue
Hello guys, i'm trying to import an adau1466 project from SigmaStudio 4.7 to SigmaStudio+ 2.4.0 but it fails. I've hit link-compile-download and exported the system files. In SigmaStudio+ i'm importin
-
Sigmastudio + buggy tcp/ip
I'm trying to write some software that makes use of the tcp/ip connection from SigmaStudio+. Every time the socket is closed, or takes too long (while debugging with breakpoints for example) sigma stu
-
ADAU1467 not programming with SPI and TCP/IP.
Hello I’m a bit lost in trying to find a solution why the DSP is not programming with my own written software. My setup: Sigmastudio+ 2.4.0 TCP <->connected with my own board <-> SPI <-> EVAL-ADAU1467
-
Graphical Eq strange behaviour (missing filters when more more than 1 channel)
I'm running into a problem with the graphical eq filter module in SigmaStudio+. Whenever the number of channels is increased to more than 1, the parameter output only has half the number of iir coeffi